|
 |
| |
|
 |
|
| One
or two Intel® Xeon™processor(s) with 512KB of integrated L2
cache and a 400MHz/533MHz system bus |
| Memory
Capacity |
Four
DIMM sockets for up to 8 GB of registered ECC DDR266 memory1
(memory must be populated in pairs of equal-size DIMMS) |
| Memory
Type |
DDR266
registered SDRAM 72-bit ECC, 184-pin gold-plated DIMMs |
| DIMM
Sizes |
128
MB, 256 MB, 512 MB, 1 GB, 2 GB |
| Memory
Voltage |
2.5
V only |
| Error
Detection |
Corrects
single-bit errors, detects double-bit errors (using ECC memory),
and and provides Intel® x4 Single Device Data Correction support
(using x4 DRAM devices only)3 |
| Chipset |
Intel®
E7505 |
| Serial
ATA Controller |
Silicon
Image* Si3112A, provides two channels of Serial ATA and integrated
RAID |
| Intel®
PRO Network Connections |
One
Intel® PRO/100+ Network Connection (10/100 Intel® 82550PM Fast
Ethernet controller) and one Intel® PRO/1000 Network Connection
(10/100/1000 Intel® 82540EM Gigabit Ethernet controller) |
| Video |
ATI*
Rage* XL SVGA PCI video controller with 8 MB of video memory/td>
|
| Super
I/O Controller |
National
Semiconductor* PC87417 |
| PCI |
Three
independent PCI buses, five total slots: two PCI-X 64-bit/100MHz,
one PCI 64-bit/66MHz, and two PCI 32-bit/33MHz |
| IDE |
Two
parallel ATA/100 channels capable of supporting up to 4 IDE
devices and two SATA channels capable of supporting up to 2
SATA drives |
| USB |
Four
USB ports: three stacked USB connectors on I/O rear panel, one
via 10-pin internal header |
| Serial
Ports |
Two
serial ports: one asynchronous 9-pin RS-232C, one via 10-pin
internal header |
| Floppy
Controller |
1.44
MB, 2.88 MB, 3-mode support |
| Keyboard/Mouse |
Two
PS/2 ports, 8240A-compatible |
| Hardware |
Winbond®
83627HF controller |
| Software |
LANDesk*
Client Manager software |
| Server
Troubleshooting |
Continuous
health monitoring, textconsole redirection, and error logs |
| Operating
Systems Supported by LANDesk* Client Manager |
Windows*
2000, Windows XP*, Windows* Server 2003 |
|
|
|
| BIOS
Type |
1Mb
Flash EEPROM with Phoenix* BIOS, Multiboot BBS (BIOS Boot Specification)
1.4-compliant |
| Special
Features |
Plug
and Play, IDE drive autoconfigure, SMBIOS 2.3, ECC/Parity support,
multilingual support |
| Jumpers |
CMOS
clear, password clear, BIOS Recovery |
| Front-panel
Connectors |
Two
switches: power on/off and reset; four LEDs: power, HDD activity,
and NIC activity (two) |
| Server
Board Style |
SSI
EEB 3.0 (fits in many ATX-compliant tower chassis) |
| Server
Board Size |
12"
x 13" |
| +5V |
13A
maximum continuous current |
| +5V
Standby |
1A
minimum continuous current |
| +12V |
17.3A
maximum continuous current |
| +3.3V |
7.2A
maximum continuous current |
| -5V |
0A
maximum continuous current |
| -12V |
0.2A
maximum continuous current |
| Ambient
Temperature7 |
Operating
(system): 10°C to 35°C; non-operating/storage (system): –40°C
to +70°C ambient |
| Relative
Humidity |
Non-operating:
95%, non-condensing at 30°C |
| Class
A EMC regulatory compliance (based on board configured in a
compatible8 Intel host system) |
| Australia/New
Zealand |
Verified
to AS/NZS 3548, Class A C-tick Mark) |
| Canada |
CSA
60950/ Verified to ICES-003, ClassA |
| Europe |
EN60950
/ Verified to EN55022 (Class A) and EN55024 (CE Mark—EU Directive
89/336/EEC) |
| International |
IEC60950
/ CISPR 22 |
| Japan |
Verified
to CISPR-22/VCCI, Class A |
| Korea |
RRL
Certification to MIC Notices 1997-41 & 1997-42 |
| Russia |
GOST
R 50377-92 / Verified to GOSTR 29216-91, GOSTR 50628-95 |
| Taiwan |
Verified
to BSMI 13438, Class A |
| United
States |
UL
60950 / Verified to FCC, Class A |
|
|
|